Grab handles are actually one of the most important safety features of any Jeep. This is especially important if the door handles of the Jeep aren't properly attached or are poorly designed. In these cases getting in and out of your Jeep can be a dangerous experience. Unfortunately, slip and fall accidents are quite common for Jeep drivers because of the height of the vehicle. So, here is a helpful guide of how to choose proper heavy duty grab handles and how to install them.
Important Features of Heavy Duty Grab Handles
Sturdiness
This feature comes as a combination of durable materials and effective attachment methods. Heavy-duty grab handles can be secured by using bolts or they can be welded onto the Jeep itself. When compared, welding provides a more sturdy connection which results in enhanced security. However, the bolted type of mounting is also effective and widely used. As for materials, you can never go wrong with high-strength steel. This type of heavy duty grab handles won't warp or bow and will serve their purpose for a long time.
Aerodynamics
When looking for an ideal model of grab handles make sure that the ones you do decide to use have little to no effect on your Jeep aerodynamics. If they create any unnecessary drag, it will ultimately result in extra fuel costs. And each driver and handle manufacturer know how important fuel consumption is. Moreover, you should be aware that long road trips and bumpy roads may create noise if your handles are poorly designed or attached.
Rust Resistance
Regardless of the vehicle of your choice, appearance and keeping it clean should be a priority. This can reflect a driver's attention to detail and overall hygiene. So, that is why it is always recommended that, when looking through the many choices available, you opt for grab handles made of high-quality steel that features powder coating which prevents rust and different levels of corrosion. Moreover, this feature makes the handles more reliable and durable.
How to Install Heavy Duty Grab Handles
Now that you know the type of handles you need, it is time to inform yourself about how to install them. The first thing you need to do is remove the bolts in the upper corner of the windshield frame. Once all that is properly done, you should install the short bolt through the top hole of the grab handle and then via the short spacer. Make sure that you tighten the bolt into the upper hole of the windshield frame.
After that you need to place the long spacer on the side hole and adjoin the long bolt through the grab handle and long spacer. Tighten the bolt, and then tighten the upper and the side bolts. Remember to check which handle is designed for the left and which for the right side of the Jeep, and make sure that you avoid any mistakes during the installation process.
